The easy and cost effective system for dump bodies, belly dumps and end dumps! Start with our affordable and easy-to-operate Econo-Pull™ tarp. Next comes the Basic Manual Arm System with crank relocator and 4- or 5-spring arm kit. These arms are clear polymer-coated galvanized steel to resist corrosion. The final upgrade is to the Premium Manual System, which adds the Duo-Latch™ option for tarp tensioning.

              ————————————————————————

Econo-Pull™ Windowshade Tarp
The Econo-Pull™ windowshade tarp pulls with a rope and retracts with a 1:1 direct-drive manual crank that backrolls to set and maintain tension. A tarp guide attached to the housing's side brackets holds the tarp bar level on top of the trailer. Pull the tarp over the load, secure the rear gate hooks and backroll. The tarp tube is attached to a reinforced bow pocket.

              ————————————————————————

Basic Manual Arm System
This upgrade adds a crank relocator and 4- or 5-spring arm kit that allows the manual crank to transfer motion from the ground. The tarp winds neatly to the tarp axle in the housing where it's protected from
wind and inclement weather.

              ————————————————————————

Premium Manual Arm System
This upgrade adds our exclusive Duo-Latch™system, equipping each arm with its own latch that locks automatically when the arms reach the back of the box. This permits tarp tensioning through back rolling and reduces tarp flutter. A release level allows the operator to unlock both of the latches simultaneously while remaining safely on the ground.